A large industrial
manufacturing facility build
A large industrial manufacturing facility build
ACS was employed by WFEL to design and build a 5000m2 industrial manufacturing facility for WFEL in Stockport. The facility will play a key role in the UK Ministry of Defence’s Boxer Programme where WFEL LIMITED will manufacture a substantial portion of the British Army’s 500 new Boxer Mechanised Infantry Vehicles (MIVs).
The build consisted of the following:
- Removal of the existing Spaciotempo temporary buildings.
- Breaking up and crushing the existing floor slabs and service yard, utilising a mobile tracked crusher that provided the recycled stone that was used to stabilise the ground for the construction of the new floor slab following the removal of below ground obstructions.
- Construction of mass filled and reinforced concrete foundations.
- Erection of a steel framed portal building up to 14m high that required heavy duty steel columns to support the 3 internal 25t cranes.
- Insulated roof and wall cladding systems to achieve the specified Air permeability testing requirements.
- Construction of the internal floor slab laid to the specified FM2 4th edition 2014 specification.
- Construction of the CMM high tolerance machine pit bases constructed to the German specified design to accommodate the manufacturing machinery.
- Construction of the concrete external service yard, access roads and loading bays.
- External concrete ramp access roads to the rear higher level storage areas.
Works also included the coordination and erection of three 25 tonne cranes. 685m3 of recycled concrete and 1682m3 of site materials were reused in the construction process, this was in line with the specification detailed by the consultant, Ramboll`s and carried out in accordance with the Material Management Plan in accordance with the CL:AIRE code of practice.
The floor slab was constructed to the FM2 tolerance to achieve the client’s specification.
Because of the time-critical nature of the project, ACS Construction Group was granted Key Worker status by the Government to enable the build to be delivered within the agreed timescale, while a range of new COVID protocols – both on and off site – allowed ACS employees and partners to work safely within the community without compromising efficiency. The project was successfully completed on time and within budget.
“We are delighted to have taken ownership of a state-of-the-art manufacturing facility from ACS. This is an extremely important step in the journey we are taking, leading to full rate Boxer Mechanised Infantry Vehicle production. Throughout the construction phase, ACS proved to be flexible with the management of change and completed the build project safely, on time and to the defined quality standards – despite the huge challenges in working practice presented by the COVID-19 pandemic.
“The new building fully meets our expectations, having been constructed on a brownfield site at our premises in Stockport. We will now establish the UK Centre of Excellence for the manufacture of Boxer Vehicles for the UK Ministry of Defence. This is a significant milestone in the history of Military Vehicle production in the UK.”